Termite risk and pest inspections in Clyde VIC

Victorian homes in this corridor are built with a termite management system, usually a physical barrier installed under the external walls at frame stage, and a notice recording it goes in the meter box. We find both problems regularly: barriers not installed when the frame was inspected, and notices missing at handover. Neither is visible once the house is finished.

The physical barrier goes in at frame stage. If it is missed, nobody sees it again.

The notice in the meter box records what system was installed and when.

Unsealed service penetrations through external brickwork are a concealed entry path.

Conducive conditions matter more than the building itself: damp, shade and timber against walls.

A pest inspection under AS 4349.3 reports evidence and risk. It is never a guarantee.

More about Clyde

Written by our local inspection team from work carried out in Clyde. Licensed building practitioners.

Guides for Clyde owners and buyers

11 March 2026 · 7 min read

When to book each stage inspection on a Clyde build

The order Clyde trades follow, and the window before each stage is covered.

2 April 2026 · 8 min read

Frame inspection in Clyde: what gets checked before the wrap goes on

Bracing, tie-down and plumb, measured against N2 wind loads.

14 May 2026 · 6 min read

Lock-up inspection in Clyde: the last look before plaster

Sarking, flashings and window seals, checked while they can still be seen.

Termite risk and pest inspections in Clyde VIC: common questions

Do I need a pest inspection on a new build?

At handover, check the barrier and the notice. For an established home, a full timber pest inspection under AS 4349.3 is the right scope.

What are conducive conditions?

Anything giving termites food, water or shelter near the house: garden beds against brickwork, poor drainage, stored timber, dense planting.

Can you treat termites?

No. We inspect and report. Treatment and any warranty come from a licensed pest controller.